Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Flooring Sistem
Lantai Epoxy Self-Leveling Flooring
A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.
- Smooth Self-Leveling Finish
- Seamless Cleanable Surface
- Dense 100% Solids Layer
- Custom Color Selection
Perkenalan produk
Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.
Fitur utama:
A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.
Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.
Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.
Kekhawatiran produk pelanggan
A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.
Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.
Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.
Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.
A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.
Aplikasi yang Tipis
Pharmaceutical production suitesCleanroom circulation corridorsRuang perakitan peralatan medisLaboratorium yang dikendalikanPackaging and inspection areas
Parameter teknis
The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.
| Bahan inti | Pigmented two-part epoxy resin with fine graded quartz or mineral filler |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.5–4.0 mm installed system thickness |
| Efektif lebar | Typically 2500–5000 mm placement bay width |
| Panjang maksimum | Typically up to 20000 mm continuous run between planned movement joints |
| Baja menghadap ketebalan | 0 mm; the resin flooring system has no steel facing |
| Kepadatan inti (core density) | Approximately 1600–1900 kg/m³ for the mixed filled resin |
| Konduktivitas Termal (Thermal Conductivity) | Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer |
| Permukaan selesai | Smooth gloss or satin pigmented finish with optional fine slip texture |
| Jenis Bersama | Primer-bonded seamless topping with structural slab joints carried through and sealed |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts
Planning a Epoxy Self-Leveling Flooring specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
