Blue epoxy self-leveling flooring sample in a complete three-quarter view

クリーンルームフロアシステム

E エポキシの自己平らな床

A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.

Smooth Self-Leveling Finish
Seamless Cleanable Surface
Dense 100% Solids Layer
Custom Color Selection

見積もりリクエスト製品案内

商品紹介

Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.

主要な特徴

The flowing resin closes shallow surface irregularities and produces a uniform plane with minimal roller texture.

A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.

Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.

Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.

お客様の製品に関する懸念事項

A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.

Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.

Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.

Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.

A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.

典型的な用途

製薬生産スイートCleanroom circulation corridorsMedical-device assembly rooms管理研究室Packaging and inspection areas

技術的なパラメータ

The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.

コア材料	Pigmented two-part epoxy resin with fine graded quartz or mineral filler
パネルの厚さ	1.5–4.0 mm installed system thickness
有効幅	Typically 2500–5000 mm placement bay width
最大長さ	Typically up to 20000 mm continuous run between planned movement joints
鋼鉄の厚さを直面する	0 mm; the resin flooring system has no steel facing
コア密度	Approximately 1600–1900 kg/m³ for the mixed filled resin
熱伝導率	Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer
表面仕上げ	Smooth gloss or satin pigmented finish with optional fine slip texture
ジョイントタイプ	Primer-bonded seamless topping with structural slab joints carried through and sealed
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts

Planning a Epoxy Self-Leveling Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する