Sistem Lantai Bilik Bersih

Epoxy Self-Leveling Flooring

A flow-applied epoxy topping that levels minor substrate variation and cures into a dense, seamless surface for controlled interior spaces.

Smooth Self-Leveling Finish
Seamless Cleanable Surface
Dense 100% Solids Layer
Custom Color Selection

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Epoxy self-leveling flooring combines a pigmented epoxy binder with fine graded mineral filler to create a fluid wearing layer over properly prepared and primed concrete. A notched rake establishes the designed thickness, while spike rolling releases entrapped air before cure. The resulting continuous surface has no tile joints to collect residue and provides a stable base for routine cleaning, wheeled traffic and clearly marked production zones. Integral coving can continue the finish from floor to wall.

Ciri-ciri Utama

The flowing resin closes shallow surface irregularities and produces a uniform plane with minimal roller texture.

A dense, non-porous wearing layer limits dusting from the underlying concrete and simplifies wipe-down cleaning.

Fine mineral filler improves dimensional stability, abrasion resistance and resistance to routine trolley traffic.

Pigmented resin can be coordinated with coves, aisle markings and contrasting safety zones without introducing open seams.

Kebimbangan Produk Pelanggan

A self-leveling floor must achieve a flat, closed finish without trapping air or allowing weak concrete to print through the resin layer.

Uneven concrete creates low spots where wash water and cleaning solution remain.The flow-applied epoxy layer is raked to a controlled thickness and spike-rolled to form a continuous level surface.

Pinholes in porous concrete become contamination traps in the finished floor.A compatible penetrating primer seals the prepared substrate before the self-leveling body coat is placed.

Tile joints release particles and slow routine sanitation work.The poured system forms a joint-free field and can be turned up as an integral cove at perimeter walls.

A thin decorative paint wears through under carts and repeated foot traffic.A 1.5–4.0 mm filled epoxy topping provides substantially more wearing depth than a thin-film coating.

Permohonan yang biasa

Pharmaceutical production suitesCleanroom circulation corridorsMedical-device assembly roomsControlled laboratoriesPackaging and inspection areas

Parameter teknikal

The following ranges describe a typical filled epoxy self-leveling system for prepared interior concrete.

Bahan Teras	Pigmented two-part epoxy resin with fine graded quartz or mineral filler
Ketebalan Panel	1.5–4.0 mm installed system thickness
Lebar berkesan	Typically 2500–5000 mm placement bay width
Panjang maksimum	Typically up to 20000 mm continuous run between planned movement joints
Keluli Menghadapi Ketebalan	0 mm; the resin flooring system has no steel facing
Ketumpatan teras	Approximately 1600–1900 kg/m³ for the mixed filled resin
Kekonduksian Terma	Typically 0.30–0.45 W/(m·K) for the cured filled epoxy layer
Kemasan permukaan	Smooth gloss or satin pigmented finish with optional fine slip texture
Jenis Bersatu	Primer-bonded seamless topping with structural slab joints carried through and sealed
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

1.5–2.0 mm light-duty or 3.0–4.0 mm higher-build systemGloss or satin protective topcoatIntegral cove base and drain detailingCustom colors and safety-line layouts

Planning a Epoxy Self-Leveling Flooring specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami