Portable cleanroom inspection light with stainless mobile stand and sealed LED head

Iluminação de sala limpa e equipamentos elétricos

Luz de inspeção de sala limpa

A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.

High-CRI Inspection Beam
Sealed Adjustable Head
Wipe-Clean Mobile Stand
Low-Heat LED Source

Solicite um orçamento. Browse produtos

Introdução do produto

The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.

Características-chave

High color rendering helps reveal surface staining, scratches and seal discontinuities.

A pivoting sealed head directs the beam without touching the inspected item.

The enclosed LED source produces less radiant heat than a conventional task lamp.

A low-center-of-gravity base remains stable while passing over floor joints.

Smooth tubing and enclosed joints simplify wipe-down between rooms.

Preocupações do produto do cliente

Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.

Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.

Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.

A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.

Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.

Aplicações típicas

Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification

Parâmetros técnicos

Typical configurable construction ranges for a portable cleanroom inspection light are listed below.

Material principal	SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window
Painel de espessura	35-70 mm sealed inspection-head depth
Largura efetiva	120-400 mm luminous head width
Comprimento máximo	Up to 1800 mm overall adjustable stand height
Aço enfrentando espessura	1.0-1.5 mm SUS304 tubing and base cover
Densidade Core	Approximately 7900-8000 kg/m³ for austenitic stainless support material
Condutividade térmica	14-16 W/(m·K) for the stainless support structure
Superfície acabado	Fine-brushed stainless stand with white or silver sealed LED head and clear optic
Tipo conjunto	Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment

Planning a Cleanroom Inspection Light specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe