Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Z Lumière d'inspection Cleanroom
A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.
- High-CRI Inspection Beam
- Sealed Adjustable Head
- Wipe-Clean Mobile Stand
- Low-Heat LED Source
Introduction de produit
The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.
Key Features
A pivoting sealed head directs the beam without touching the inspected item.
The enclosed LED source produces less radiant heat than a conventional task lamp.
A low-center-of-gravity base remains stable while passing over floor joints.
Smooth tubing and enclosed joints simplify wipe-down between rooms.
Préoccupations du client produit
Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.
Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.
Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.
A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.
Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.
Les applications typiques
Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification
Paramètres techniques
Typical configurable construction ranges for a portable cleanroom inspection light are listed below.
| Matériaux de base | SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window |
|---|---|
| Panneau épaisseur | 35-70 mm sealed inspection-head depth |
| Largeur effective | 120-400 mm luminous head width |
| Longueur maximale | Up to 1800 mm overall adjustable stand height |
| Acier face épaisseur | 1.0-1.5 mm SUS304 tubing and base cover |
| Densité Core | Approximately 7900-8000 kg/m³ for austenitic stainless support material |
| Conductivité thermique | 14-16 W/(m·K) for the stainless support structure |
| surface finie | Fine-brushed stainless stand with white or silver sealed LED head and clear optic |
| Type joint | Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment
Planning a Cleanroom Inspection Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
