Portable cleanroom inspection light with stainless mobile stand and sealed LED head

クリーンルーム照明 · 電気機器

クリーンルーム点検ライト

A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.

High-CRI Inspection Beam
Sealed Adjustable Head
Wipe-Clean Mobile Stand
Low-Heat LED Source

見積もりリクエスト製品案内

商品紹介

The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.

主要な特徴

High color rendering helps reveal surface staining, scratches and seal discontinuities.

A pivoting sealed head directs the beam without touching the inspected item.

The enclosed LED source produces less radiant heat than a conventional task lamp.

A low-center-of-gravity base remains stable while passing over floor joints.

Smooth tubing and enclosed joints simplify wipe-down between rooms.

お客様の製品に関する懸念事項

Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.

Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.

Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.

A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.

Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.

典型的な用途

Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification

技術的なパラメータ

Typical configurable construction ranges for a portable cleanroom inspection light are listed below.

コア材料	SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window
パネルの厚さ	35-70 mm sealed inspection-head depth
有効幅	120-400 mm luminous head width
最大長さ	Up to 1800 mm overall adjustable stand height
鋼鉄の厚さを直面する	1.0-1.5 mm SUS304 tubing and base cover
コア密度	Approximately 7900-8000 kg/m³ for austenitic stainless support material
熱伝導率	14-16 W/(m·K) for the stainless support structure
表面仕上げ	Fine-brushed stainless stand with white or silver sealed LED head and clear optic
ジョイントタイプ	Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment

Planning a Cleanroom Inspection Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する