English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
غرفة نظيفة ضوء التفتيش
A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.
- High-CRI Inspection Beam
- Sealed Adjustable Head
- Wipe-Clean Mobile Stand
- Low-Heat LED Source
مقدمة المنتج
The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.
الخصائص الرئيسية
A pivoting sealed head directs the beam without touching the inspected item.
The enclosed LED source produces less radiant heat than a conventional task lamp.
A low-center-of-gravity base remains stable while passing over floor joints.
Smooth tubing and enclosed joints simplify wipe-down between rooms.
مخاوف المنتج للعملاء
Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.
Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.
Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.
A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.
Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.
تطبيقات نموذجية
Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification
المعلمات الفنية
Typical configurable construction ranges for a portable cleanroom inspection light are listed below.
| المواد الأساسية | SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window |
|---|---|
| سمك اللوحة | 35-70 mm sealed inspection-head depth |
| العرض الفعال | 120-400 mm luminous head width |
| الحد الأقصى الطول | Up to 1800 mm overall adjustable stand height |
| الصلب يواجه سمك | 1.0-1.5 mm SUS304 tubing and base cover |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for austenitic stainless support material |
| الموصلية الحرارية | 14-16 W/(m·K) for the stainless support structure |
| إنهاء السطح | Fine-brushed stainless stand with white or silver sealed LED head and clear optic |
| نوع المشترك | Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment
Planning a Cleanroom Inspection Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
