Portable cleanroom inspection light with stainless mobile stand and sealed LED head

클린룸 조명 및 전기 장비

클린룸 검사 조명

A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.

High-CRI Inspection Beam
Sealed Adjustable Head
Wipe-Clean Mobile Stand
Low-Heat LED Source

견적 요청 제품 찾아보기

상품 소개

The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.

주요 기능

High color rendering helps reveal surface staining, scratches and seal discontinuities.

A pivoting sealed head directs the beam without touching the inspected item.

The enclosed LED source produces less radiant heat than a conventional task lamp.

A low-center-of-gravity base remains stable while passing over floor joints.

Smooth tubing and enclosed joints simplify wipe-down between rooms.

고객 제품 관심사

Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.

Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.

Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.

A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.

Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.

일반적인 응용 프로그램

Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification

기술 매개변수

Typical configurable construction ranges for a portable cleanroom inspection light are listed below.

핵심 재료	SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window
패널 두께	35-70 mm sealed inspection-head depth
유효 폭	120-400 mm luminous head width
최대 길이	Up to 1800 mm overall adjustable stand height
강철 면면 두께	1.0-1.5 mm SUS304 tubing and base cover
코어 밀도	Approximately 7900-8000 kg/m³ for austenitic stainless support material
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless support structure
표면 마무리	Fine-brushed stainless stand with white or silver sealed LED head and clear optic
접합 유형	Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment

Planning a Cleanroom Inspection Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.