Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Reinraum Inspektionslicht
A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.
- High-CRI Inspection Beam
- Sealed Adjustable Head
- Wipe-Clean Mobile Stand
- Low-Heat LED Source
Produkteinführung
The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.
Key Features
A pivoting sealed head directs the beam without touching the inspected item.
The enclosed LED source produces less radiant heat than a conventional task lamp.
A low-center-of-gravity base remains stable while passing over floor joints.
Smooth tubing and enclosed joints simplify wipe-down between rooms.
Kunden Produktbedenken
Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.
Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.
Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.
A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.
Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.
Typische Anwendungen
Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification
Technische Parameter
Typical configurable construction ranges for a portable cleanroom inspection light are listed below.
| Core Material | SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window |
|---|---|
| Panel Dicke | 35-70 mm sealed inspection-head depth |
| Effektive Breite | 120-400 mm luminous head width |
| Maximale Länge | Up to 1800 mm overall adjustable stand height |
| Stahl facing Dicke | 1.0-1.5 mm SUS304 tubing and base cover |
| Kerndichte | Approximately 7900-8000 kg/m³ for austenitic stainless support material |
| Thermische Leitfähigkeit | 14-16 W/(m·K) for the stainless support structure |
| Oberfläche Finish | Fine-brushed stainless stand with white or silver sealed LED head and clear optic |
| Gemeinsamer Typ | Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment
Planning a Cleanroom Inspection Light specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
