Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Luz de inspección de sala limpia
A mobile high-CRI task light with a sealed adjustable head for examining surfaces, seals and components without a fixed ceiling installation.
- High-CRI Inspection Beam
- Sealed Adjustable Head
- Wipe-Clean Mobile Stand
- Low-Heat LED Source
Introducción del producto
The inspection light concentrates a neutral-white LED beam onto a small work or maintenance area. Its round or bar-shaped head pivots on a smooth arm, while the enclosed driver and weighted wheeled base keep cables organized. Stainless tubing and cleanable polymer controls allow the unit to move between inspection points without introducing fabric shades, exposed springs or cooling fans.
Características clave
A pivoting sealed head directs the beam without touching the inspected item.
The enclosed LED source produces less radiant heat than a conventional task lamp.
A low-center-of-gravity base remains stable while passing over floor joints.
Smooth tubing and enclosed joints simplify wipe-down between rooms.
Preocupaciones del producto del cliente
Inspection lighting must reveal small defects while remaining mobile, stable and easy to clean around articulated joints.
Ceiling illumination casts shadows inside equipment recesses.An adjustable local head directs high-CRI light from the required angle.
Open spring arms capture particles and cleaning fluid.Enclosed pivots and smooth tubular supports replace exposed balancing springs.
A lightweight stand tips when the head is extended.A weighted wide base keeps the center of gravity within the wheel footprint.
Hot lamps can affect sensitive parts or operator comfort.Efficient LEDs provide bright inspection light with lower radiant heat.
Aplicaciones típicas
Panel-joint inspectionEquipment maintenance checksSurface-finish examinationPrecision assembly verification
Parámetros técnicos
Typical configurable construction ranges for a portable cleanroom inspection light are listed below.
| Materiales Core | SUS304 tubular stand with aluminum LED head, sealed electronic driver and polycarbonate optical window |
|---|---|
| Panel de espesor | 35-70 mm sealed inspection-head depth |
| Ancho efectivo | 120-400 mm luminous head width |
| Longitud máxima | Up to 1800 mm overall adjustable stand height |
| Acero frente a espesor | 1.0-1.5 mm SUS304 tubing and base cover |
| Densidad Core | Approximately 7900-8000 kg/m³ for austenitic stainless support material |
| Conductividad térmica | 14-16 W/(m·K) for the stainless support structure |
| Superficie acabada | Fine-brushed stainless stand with white or silver sealed LED head and clear optic |
| Tipo conjunto | Enclosed friction pivots with gasketed optical window and smooth cable-managed support tube |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Mobile base or wall armSpot, flood or adjustable beamBattery or corded powerMagnifying lens attachment
Planning a Cleanroom Inspection Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
