Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Limpeza de chão Cleanroom
Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.
- Flush Wipe-Clean Cover
- Gasketed Drainage Access
- Secured Tool-Operated Opening
- 304 or 316L Stainless Finish
Introdução do produto
The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.
Características-chave
A replaceable gasket limits liquid and odor migration around the access cover.
Tool-operated fasteners discourage accidental or unauthorized opening.
The welded frame and riser provide a continuous corrosion-resistant maintenance path.
Preocupações do produto do cliente
Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.
A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.
Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.
Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.
Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.
Aplicações típicas
Cleanroom corridorsLaboratory suitesUtility chasesProcess support areas
Parâmetros técnicos
Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.
| Material principal | AISI 304 or 316L stainless steel frame, cover and riser |
|---|---|
| Painel de espessura | 1.5-2.5 mm welded frame and riser wall |
| Largura efetiva | 100-250 mm cover width |
| Comprimento máximo | Up to 350 mm overall access body length |
| Aço enfrentando espessura | 2.0-3.0 mm exposed stainless cover |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável |
| Superfície acabado | Satin-finished or polished exposed stainless steel |
| Tipo conjunto | Gasketed bolted cover seated on a continuously welded access riser |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Round or square format100-250 mm cover sizeGrau 304 ou 316LSolid or recessed infill cover
Planning a Cleanroom Floor Cleanout specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
