English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Уборка пола в чистой комнате
Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.
- Flush Wipe-Clean Cover
- Gasketed Drainage Access
- Secured Tool-Operated Opening
- 304 or 316L Stainless Finish
Введение продукции
The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.
Основные характеристики
A replaceable gasket limits liquid and odor migration around the access cover.
Tool-operated fasteners discourage accidental or unauthorized opening.
The welded frame and riser provide a continuous corrosion-resistant maintenance path.
Обеспокоенность клиентов продуктами
Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.
A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.
Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.
Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.
Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.
Типичные приложения
Cleanroom corridorsLaboratory suitesUtility chasesProcess support areas
Технические параметры
Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.
| Основной материал | AISI 304 or 316L stainless steel frame, cover and riser |
|---|---|
| Толщина панели | 1.5-2.5 mm welded frame and riser wall |
| эффективная ширина | 100-250 mm cover width |
| Максимальная длина | Up to 350 mm overall access body length |
| Толщина линий стали | 2.0-3.0 mm exposed stainless cover |
| Плотность ядра | 7900 - 8000 кг / м3 для нержавеющей стали |
| Теплопроводимость | 14 - 16 Вт / (м · К) для нержавеющей стали |
| Поверхностная отделка | Satin-finished or polished exposed stainless steel |
| Объединенный тип | Gasketed bolted cover seated on a continuously welded access riser |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Round or square format100-250 mm cover size304 or 316L gradeSolid or recessed infill cover
Planning a Cleanroom Floor Cleanout specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
