Complete flush stainless cleanroom floor cleanout in three-quarter view

클린룸 배수, 위생 및 안전 장비

클린룸 바닥 청소

Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.

Flush Wipe-Clean Cover
Gasketed Drainage Access
Secured Tool-Operated Opening
304 or 316L Stainless Finish

견적 요청 제품 찾아보기

상품 소개

The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.

주요 기능

A near-flush stainless cover avoids an open grate in normally dry controlled areas.

A replaceable gasket limits liquid and odor migration around the access cover.

Tool-operated fasteners discourage accidental or unauthorized opening.

The welded frame and riser provide a continuous corrosion-resistant maintenance path.

고객 제품 관심사

Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.

A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.

Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.

Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.

Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.

일반적인 응용 프로그램

클린 룸 복도Laboratory suitesUtility chasesProcess support areas

기술 매개변수

Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.

핵심 재료	AISI 304 or 316L stainless steel frame, cover and riser
패널 두께	1.5-2.5 mm welded frame and riser wall
유효 폭	100-250 mm cover width
최대 길이	Up to 350 mm overall access body length
강철 면면 두께	2.0-3.0 mm exposed stainless cover
코어 밀도	7900 - 8000 kg / m 3 스테인레스 스틸
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 스테인레스 스틸
표면 마무리	Satin-finished or polished exposed stainless steel
접합 유형	Gasketed bolted cover seated on a continuously welded access riser
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Round or square format100-250 mm cover size304 또는 316 L 등급Solid or recessed infill cover

Planning a Cleanroom Floor Cleanout specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.