Complete flush stainless cleanroom floor cleanout in three-quarter view

Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları

Temiz Oda zemin temizliği

Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.

Flush Wipe-Clean Cover
Gasketed Drainage Access
Secured Tool-Operated Opening
304 or 316L Stainless Finish

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.

Ana Özellikler

A near-flush stainless cover avoids an open grate in normally dry controlled areas.

A replaceable gasket limits liquid and odor migration around the access cover.

Tool-operated fasteners discourage accidental or unauthorized opening.

The welded frame and riser provide a continuous corrosion-resistant maintenance path.

Müşteri Ürün Sorunları

Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.

A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.

Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.

Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.

Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.

Tipik uygulamalar

Cleanroom corridorsLaboratory suitesUtility chasesProcess support areas

Teknik parametreler

Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.

Temel malzemeler	AISI 304 or 316L stainless steel frame, cover and riser
Panel kalınlığı	1.5-2.5 mm welded frame and riser wall
Effective Width (Etkili Genişlik)	100-250 mm cover width
Maksimum uzunluk	Up to 350 mm overall access body length
Çelik yüz yüze kalınlığı	2.0-3.0 mm exposed stainless cover
Core Density (Çekirdek Yoğunluğu)	7900-8000 kg/m³ for stainless steel
Termal İletkenlik	14-16 W/(m·K) for stainless steel
Yüzey bitirme	Satin-finished or polished exposed stainless steel
Ortak tip	Gasketed bolted cover seated on a continuously welded access riser
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Round or square format100-250 mm cover size304 or 316L gradeSolid or recessed infill cover

Planning a Cleanroom Floor Cleanout specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun