Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Drainage de salle blanche, équipement d'hygiène et de sécurité
Z Cleanroom Plancher Nettoyage
Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.
- Flush Wipe-Clean Cover
- Gasketed Drainage Access
- Secured Tool-Operated Opening
- 304 or 316L Stainless Finish
Introduction de produit
The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.
Key Features
A replaceable gasket limits liquid and odor migration around the access cover.
Tool-operated fasteners discourage accidental or unauthorized opening.
The welded frame and riser provide a continuous corrosion-resistant maintenance path.
Préoccupations du client produit
Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.
A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.
Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.
Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.
Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.
Les applications typiques
Cleanroom corridorsLaboratory suitesUtility chasesProcess support areas
Paramètres techniques
Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.
| Matériaux de base | AISI 304 or 316L stainless steel frame, cover and riser |
|---|---|
| Panneau épaisseur | 1.5-2.5 mm welded frame and riser wall |
| Largeur effective | 100-250 mm cover width |
| Longueur maximale | Up to 350 mm overall access body length |
| Acier face épaisseur | 2.0-3.0 mm exposed stainless cover |
| Densité Core | 7900 - 8000 kg / m3 pour l'acier inoxydable |
| Conductivité thermique | 14 - 16 W / (m · K) en acier inoxydable |
| surface finie | Satin-finished or polished exposed stainless steel |
| Type joint | Gasketed bolted cover seated on a continuously welded access riser |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Round or square format100-250 mm cover sizeGrade 304 ou 316LSolid or recessed infill cover
Planning a Cleanroom Floor Cleanout specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
