Complete flush stainless cleanroom floor cleanout in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

クリーンルームの床のクリーンアウト

Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.

Flush Wipe-Clean Cover
Gasketed Drainage Access
Secured Tool-Operated Opening
304 or 316L Stainless Finish

見積もりリクエスト製品案内

商品紹介

The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.

主要な特徴

A near-flush stainless cover avoids an open grate in normally dry controlled areas.

A replaceable gasket limits liquid and odor migration around the access cover.

Tool-operated fasteners discourage accidental or unauthorized opening.

The welded frame and riser provide a continuous corrosion-resistant maintenance path.

お客様の製品に関する懸念事項

Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.

A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.

Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.

Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.

Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.

典型的な用途

クリーンルームの廊下Laboratory suitesUtility chasesProcess support areas

技術的なパラメータ

Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.

コア材料	AISI 304 or 316L stainless steel frame, cover and riser
パネルの厚さ	1.5-2.5 mm welded frame and riser wall
有効幅	100-250 mm cover width
最大長さ	Up to 350 mm overall access body length
鋼鉄の厚さを直面する	2.0-3.0 mm exposed stainless cover
コア密度	ステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	14 — 16 W / （ m · K ）ステンレス鋼
表面仕上げ	Satin-finished or polished exposed stainless steel
ジョイントタイプ	Gasketed bolted cover seated on a continuously welded access riser
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Round or square format100-250 mm cover size304 または 316L の等級Solid or recessed infill cover

Planning a Cleanroom Floor Cleanout specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する