Complete flush stainless cleanroom floor cleanout in three-quarter view

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Pembersihan Lantai Bilik Bersih

Flush stainless access cover for inspecting and clearing concealed cleanroom drainage lines without a permanent open grate.

Flush Wipe-Clean Cover
Gasketed Drainage Access
Secured Tool-Operated Opening
304 or 316L Stainless Finish

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom floor cleanout provides sealed access to a concealed drainage riser while keeping the exposed floor surface flush and easy to wipe. A removable stainless cover seats in a welded frame with a compressible gasket and secured fasteners. Round and square formats can be matched to resin, vinyl or tiled finishes, with the riser diameter and depth selected for the drainage line below.

Ciri-ciri Utama

A near-flush stainless cover avoids an open grate in normally dry controlled areas.

A replaceable gasket limits liquid and odor migration around the access cover.

Tool-operated fasteners discourage accidental or unauthorized opening.

The welded frame and riser provide a continuous corrosion-resistant maintenance path.

Kebimbangan Produk Pelanggan

Concealed drains need occasional rodding and inspection, but permanent open grates and raised covers introduce cleaning and traffic problems in normally dry rooms.

A raised access fitting can catch wheels and disrupt a flush clean floor.The cover seats nearly level with the surrounding finished floor.

Unsealed access covers can allow odor or wash water migration.A compressed perimeter gasket seals the removable cover to its frame.

Loose covers may be opened unintentionally during cleaning or traffic.Recessed tool-operated fasteners secure the plate until maintenance is required.

Different drainage layouts require different access shapes and riser sizes.Round or square frames, cover finishes and riser dimensions can be configured for the line below.

Permohonan yang biasa

Koridor Bilik BersihLaboratory suitesUtility chasesProcess support areas

Parameter teknikal

Common stainless cleanout construction ranges are shown below; cover size, riser and floor interface are selected for the drainage line and finished floor.

Bahan Teras	AISI 304 or 316L stainless steel frame, cover and riser
Ketebalan Panel	1.5-2.5 mm welded frame and riser wall
Lebar berkesan	100-250 mm cover width
Panjang maksimum	Up to 350 mm overall access body length
Keluli Menghadapi Ketebalan	2.0-3.0 mm exposed stainless cover
Ketumpatan teras	7900-8000 kg/m³ for stainless steel
Kekonduksian Terma	14-16 W/(m·K) for stainless steel
Kemasan permukaan	Satin-finished or polished exposed stainless steel
Jenis Bersatu	Gasketed bolted cover seated on a continuously welded access riser
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Round or square format100-250 mm cover size304 or 316L gradeSolid or recessed infill cover

Planning a Cleanroom Floor Cleanout specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami