Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Bloqueio de porta eletromagnética para sala limpa
A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.
- Up to 510 kg Holding Force
- Fail-Safe Release
- Lock Status Monitoring
- Low-Profile Housing
Introdução do produto
The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.
Características-chave
Selectable 12 or 24 VDC operation integrates with common access-control power supplies.
A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.
The fail-safe principle releases the opening when controlled power is interrupted.
Preocupações do produto do cliente
A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.
Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.
Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.
The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.
Aplicações típicas
Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors
Parâmetros técnicos
Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.
| Material principal | Low-carbon steel electromagnetic core with zinc-plated steel armature |
|---|---|
| Painel de espessura | Approximately 29 mm lock-body depth |
| Largura efetiva | Approximately 66 mm lock-body face width |
| Comprimento máximo | Approximately 266 mm overall lock-body length |
| Aço enfrentando espessura | 1.2–1.5 mm stainless-steel cover, depending on housing option |
| Densidade Core | Approximately 7850 kg/m³ for the low-carbon steel magnetic core |
| Condutividade térmica | Approximately 45–60 W/(m·K) for the steel magnetic core |
| Superfície acabado | Satin anodized aluminum housing or brushed stainless-steel cover |
| Tipo conjunto | Surface-mounted magnet body with a floating through-bolted armature plate |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits
Planning a Cleanroom Electromagnetic Door Lock specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
