Cleanroom electromagnetic door lock with armature and mounting hardware

Pintu Bilik Bersih, Windows dan Sistem Interlock

Kunci Pintu Elektromagnetik Cleanroom

A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.

Up to 510 kg Holding Force
Fail-Safe Release
Lock Status Monitoring
Low-Profile Housing

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.

Ciri-ciri Utama

A floating armature plate compensates for minor door movement and maintains full face contact with the magnet.

Selectable 12 or 24 VDC operation integrates with common access-control power supplies.

A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.

The fail-safe principle releases the opening when controlled power is interrupted.

Kebimbangan Produk Pelanggan

A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.

Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.

Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.

The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.

Permohonan yang biasa

Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors

Parameter teknikal

Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.

Bahan Teras	Low-carbon steel electromagnetic core with zinc-plated steel armature
Ketebalan Panel	Approximately 29 mm lock-body depth
Lebar berkesan	Approximately 66 mm lock-body face width
Panjang maksimum	Approximately 266 mm overall lock-body length
Keluli Menghadapi Ketebalan	1.2–1.5 mm stainless-steel cover, depending on housing option
Ketumpatan teras	Approximately 7850 kg/m³ for the low-carbon steel magnetic core
Kekonduksian Terma	Approximately 45–60 W/(m·K) for the steel magnetic core
Kemasan permukaan	Satin anodized aluminum housing or brushed stainless-steel cover
Jenis Bersatu	Surface-mounted magnet body with a floating through-bolted armature plate
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits

Planning a Cleanroom Electromagnetic Door Lock specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami