English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
غرف نظيفة قفل الباب الكهرومغناطيسي
A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.
- Up to 510 kg Holding Force
- Fail-Safe Release
- Lock Status Monitoring
- Low-Profile Housing
مقدمة المنتج
The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.
الخصائص الرئيسية
Selectable 12 or 24 VDC operation integrates with common access-control power supplies.
A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.
The fail-safe principle releases the opening when controlled power is interrupted.
مخاوف المنتج للعملاء
A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.
Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.
Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.
The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.
تطبيقات نموذجية
Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors
المعلمات الفنية
Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.
| المواد الأساسية | Low-carbon steel electromagnetic core with zinc-plated steel armature |
|---|---|
| سمك اللوحة | Approximately 29 mm lock-body depth |
| العرض الفعال | Approximately 66 mm lock-body face width |
| الحد الأقصى الطول | Approximately 266 mm overall lock-body length |
| الصلب يواجه سمك | 1.2–1.5 mm stainless-steel cover, depending on housing option |
| الكثافة الأساسية | Approximately 7850 kg/m³ for the low-carbon steel magnetic core |
| الموصلية الحرارية | Approximately 45–60 W/(m·K) for the steel magnetic core |
| إنهاء السطح | Satin anodized aluminum housing or brushed stainless-steel cover |
| نوع المشترك | Surface-mounted magnet body with a floating through-bolted armature plate |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits
Planning a Cleanroom Electromagnetic Door Lock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
