Cleanroom electromagnetic door lock with armature and mounting hardware

クリーンルームのドア、窓およびインターロックシステム

クリーンルームの電磁ドアのロック

A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.

Up to 510 kg Holding Force
Fail-Safe Release
Lock Status Monitoring
Low-Profile Housing

見積もりリクエスト製品案内

商品紹介

The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.

主要な特徴

A floating armature plate compensates for minor door movement and maintains full face contact with the magnet.

Selectable 12 or 24 VDC operation integrates with common access-control power supplies.

A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.

The fail-safe principle releases the opening when controlled power is interrupted.

お客様の製品に関する懸念事項

A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.

Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.

Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.

The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.

典型的な用途

パーソナルエアロックドアCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors

技術的なパラメータ

Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.

コア材料	Low-carbon steel electromagnetic core with zinc-plated steel armature
パネルの厚さ	Approximately 29 mm lock-body depth
有効幅	Approximately 66 mm lock-body face width
最大長さ	Approximately 266 mm overall lock-body length
鋼鉄の厚さを直面する	1.2–1.5 mm stainless-steel cover, depending on housing option
コア密度	Approximately 7850 kg/m³ for the low-carbon steel magnetic core
熱伝導率	Approximately 45–60 W/(m·K) for the steel magnetic core
表面仕上げ	Satin anodized aluminum housing or brushed stainless-steel cover
ジョイントタイプ	Surface-mounted magnet body with a floating through-bolted armature plate
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits

Planning a Cleanroom Electromagnetic Door Lock specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する