Cleanroom electromagnetic door lock with armature and mounting hardware

Двери в чистых помещениях, окна и системы блокировки

Электромагнитный дверный замк для чистой комнаты

A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.

Up to 510 kg Holding Force
Fail-Safe Release
Lock Status Monitoring
Low-Profile Housing

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.

Основные характеристики

A floating armature plate compensates for minor door movement and maintains full face contact with the magnet.

Selectable 12 or 24 VDC operation integrates with common access-control power supplies.

A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.

The fail-safe principle releases the opening when controlled power is interrupted.

Обеспокоенность клиентов продуктами

A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.

Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.

Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.

The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.

Типичные приложения

Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors

Технические параметры

Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.

Основной материал	Low-carbon steel electromagnetic core with zinc-plated steel armature
Толщина панели	Approximately 29 mm lock-body depth
эффективная ширина	Approximately 66 mm lock-body face width
Максимальная длина	Approximately 266 mm overall lock-body length
Толщина линий стали	1.2–1.5 mm stainless-steel cover, depending on housing option
Плотность ядра	Approximately 7850 kg/m³ for the low-carbon steel magnetic core
Теплопроводимость	Approximately 45–60 W/(m·K) for the steel magnetic core
Поверхностная отделка	Satin anodized aluminum housing or brushed stainless-steel cover
Объединенный тип	Surface-mounted magnet body with a floating through-bolted armature plate
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits

Planning a Cleanroom Electromagnetic Door Lock specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой