Cleanroom electromagnetic door lock with armature and mounting hardware

클린룸 도어, 창문 및 인터락 시스템

클린룸 전자기 도어 잠금

A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.

Up to 510 kg Holding Force
Fail-Safe Release
Lock Status Monitoring
Low-Profile Housing

견적 요청 제품 찾아보기

상품 소개

The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.

주요 기능

A floating armature plate compensates for minor door movement and maintains full face contact with the magnet.

Selectable 12 or 24 VDC operation integrates with common access-control power supplies.

A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.

The fail-safe principle releases the opening when controlled power is interrupted.

고객 제품 관심사

A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.

Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.

Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.

The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.

일반적인 응용 프로그램

Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors

기술 매개변수

Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.

핵심 재료	Low-carbon steel electromagnetic core with zinc-plated steel armature
패널 두께	Approximately 29 mm lock-body depth
유효 폭	Approximately 66 mm lock-body face width
최대 길이	Approximately 266 mm overall lock-body length
강철 면면 두께	1.2–1.5 mm stainless-steel cover, depending on housing option
코어 밀도	Approximately 7850 kg/m³ for the low-carbon steel magnetic core
열전도도 (Thermal Conductivity)	Approximately 45–60 W/(m·K) for the steel magnetic core
표면 마무리	Satin anodized aluminum housing or brushed stainless-steel cover
접합 유형	Surface-mounted magnet body with a floating through-bolted armature plate
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits

Planning a Cleanroom Electromagnetic Door Lock specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.