Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Serrure de porte électromagnétique de salle blanche
A surface-mounted electromagnetic lock that secures cleanroom doors without a projecting mechanical latch and releases automatically when power is removed.
- Up to 510 kg Holding Force
- Fail-Safe Release
- Lock Status Monitoring
- Low-Profile Housing
Introduction de produit
The cleanroom electromagnetic door lock combines a continuously energized steel magnet with a floating armature plate fixed to the door leaf. When the door closes, the armature self-aligns against the magnet face to develop uniform holding force without an exposed bolt entering the frame. A monitored configuration can report locked or unlocked status to the access-control system, while the anodized aluminum or stainless enclosure presents a smooth surface around the header.
Key Features
Selectable 12 or 24 VDC operation integrates with common access-control power supplies.
A built-in bond sensor can provide a dry-contact indication after magnetic holding is established.
The fail-safe principle releases the opening when controlled power is interrupted.
Préoccupations du client produit
A cleanroom access lock must hold reliably without adding dirt-trapping latch pockets or interfering with emergency power-release logic.
Mechanical latches can create exposed recesses around the frame that are difficult to wipe.The magnet and armature use flat external faces with no bolt pocket in the clean opening.
Door flex or slight misalignment reduces the contact area of a rigid magnetic plate.A pivoting armature assembly self-aligns against the energized magnet face.
The control system cannot distinguish a closed door from a securely bonded lock.Optional bond and door-position contacts provide separate feedback signals.
Les applications typiques
Personnel airlock doorsCleanroom corridor access pointsLaboratory controlled entrancesInterlocked material transfer doors
Paramètres techniques
Typical construction data for a 510 kg class cleanroom electromagnetic lock are listed below.
| Matériaux de base | Low-carbon steel electromagnetic core with zinc-plated steel armature |
|---|---|
| Panneau épaisseur | Approximately 29 mm lock-body depth |
| Largeur effective | Approximately 66 mm lock-body face width |
| Longueur maximale | Approximately 266 mm overall lock-body length |
| Acier face épaisseur | 1.2–1.5 mm stainless-steel cover, depending on housing option |
| Densité Core | Approximately 7850 kg/m³ for the low-carbon steel magnetic core |
| Conductivité thermique | Approximately 45–60 W/(m·K) for the steel magnetic core |
| surface finie | Satin anodized aluminum housing or brushed stainless-steel cover |
| Type joint | Surface-mounted magnet body with a floating through-bolted armature plate |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
12 or 24 VDC coilBond-status monitoring contactSingle or double-door configurationZ-, L- or U-bracket mounting kits
Planning a Cleanroom Electromagnetic Door Lock specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
