Cleanroom access control card reader on a flush stainless wall plate

Iluminação de sala limpa e equipamentos elétricos

Sistema de Controle de Acesso à Sala Limpa

A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.

Contactless Credential Reader
Flush Cleanable Front
Door Status Monitoring
Interlock Integration

Solicite um orçamento. Browse produtos

Introdução do produto

The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.

Características-chave

Contactless credentials reduce touch points at the doorway.

A sealed flush reader face remains easy to wipe around the status window.

Door-position monitoring detects a door held open after authorized entry.

Controller inputs integrate request-to-exit, interlock and local alarm conditions.

Time-based permissions distinguish production, maintenance and visitor access.

Preocupações do produto do cliente

Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.

Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.

Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.

An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.

Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.

Aplicações típicas

Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors

Parâmetros técnicos

Typical configurable construction ranges for a cleanroom access control system are listed below.

Material principal	Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs
Painel de espessura	2.0-4.0 mm cleanroom-facing reader plate thickness
Largura efetiva	80-220 mm reader and faceplate width
Comprimento máximo	Up to 320 mm overall reader panel height
Aço enfrentando espessura	1.5-3.0 mm SUS304/SUS316L flush mounting plate
Densidade Core	Approximately 1200-2500 kg/m³ for polymer or glass reader face material
Condutividade térmica	0.20-1.10 W/(m·K) for polymer or glass reader face
Superfície acabado	Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs
Tipo conjunto	Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication

Planning a Cleanroom Access Control System specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe