Cleanroom access control card reader on a flush stainless wall plate

Éclairage de salle blanche et équipements électriques

Système de contrôle d'accès Cleanroom

A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.

Contactless Credential Reader
Flush Cleanable Front
Door Status Monitoring
Interlock Integration

Demander un devis. Browse les produits

Introduction de produit

The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.

Key Features

Contactless credentials reduce touch points at the doorway.

A sealed flush reader face remains easy to wipe around the status window.

Door-position monitoring detects a door held open after authorized entry.

Controller inputs integrate request-to-exit, interlock and local alarm conditions.

Time-based permissions distinguish production, maintenance and visitor access.

Préoccupations du client produit

Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.

Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.

Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.

An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.

Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.

Les applications typiques

Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors

Paramètres techniques

Typical configurable construction ranges for a cleanroom access control system are listed below.

Matériaux de base	Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs
Panneau épaisseur	2.0-4.0 mm cleanroom-facing reader plate thickness
Largeur effective	80-220 mm reader and faceplate width
Longueur maximale	Up to 320 mm overall reader panel height
Acier face épaisseur	1.5-3.0 mm SUS304/SUS316L flush mounting plate
Densité Core	Approximately 1200-2500 kg/m³ for polymer or glass reader face material
Conductivité thermique	0.20-1.10 W/(m·K) for polymer or glass reader face
surface finie	Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs
Type joint	Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication

Planning a Cleanroom Access Control System specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe