Cleanroom access control card reader on a flush stainless wall plate

Temiz Oda Aydınlatma ve Elektrik Ekipmanları

Temiz Oda Erişim Kontrol Sistemi

A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.

Contactless Credential Reader
Flush Cleanable Front
Door Status Monitoring
Interlock Integration

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.

Ana Özellikler

Contactless credentials reduce touch points at the doorway.

A sealed flush reader face remains easy to wipe around the status window.

Door-position monitoring detects a door held open after authorized entry.

Controller inputs integrate request-to-exit, interlock and local alarm conditions.

Time-based permissions distinguish production, maintenance and visitor access.

Müşteri Ürün Sorunları

Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.

Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.

Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.

An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.

Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.

Tipik uygulamalar

Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors

Teknik parametreler

Typical configurable construction ranges for a cleanroom access control system are listed below.

Temel malzemeler	Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs
Panel kalınlığı	2.0-4.0 mm cleanroom-facing reader plate thickness
Effective Width (Etkili Genişlik)	80-220 mm reader and faceplate width
Maksimum uzunluk	Up to 320 mm overall reader panel height
Çelik yüz yüze kalınlığı	1.5-3.0 mm SUS304/SUS316L flush mounting plate
Core Density (Çekirdek Yoğunluğu)	Approximately 1200-2500 kg/m³ for polymer or glass reader face material
Termal İletkenlik	0.20-1.10 W/(m·K) for polymer or glass reader face
Yüzey bitirme	Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs
Ortak tip	Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication

Planning a Cleanroom Access Control System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun