English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
نظام التحكم في دخول الغرف النظيفة
A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.
- Contactless Credential Reader
- Flush Cleanable Front
- Door Status Monitoring
- Interlock Integration
مقدمة المنتج
The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.
الخصائص الرئيسية
A sealed flush reader face remains easy to wipe around the status window.
Door-position monitoring detects a door held open after authorized entry.
Controller inputs integrate request-to-exit, interlock and local alarm conditions.
Time-based permissions distinguish production, maintenance and visitor access.
مخاوف المنتج للعملاء
Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.
Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.
Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.
An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.
Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.
تطبيقات نموذجية
Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors
المعلمات الفنية
Typical configurable construction ranges for a cleanroom access control system are listed below.
| المواد الأساسية | Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs |
|---|---|
| سمك اللوحة | 2.0-4.0 mm cleanroom-facing reader plate thickness |
| العرض الفعال | 80-220 mm reader and faceplate width |
| الحد الأقصى الطول | Up to 320 mm overall reader panel height |
| الصلب يواجه سمك | 1.5-3.0 mm SUS304/SUS316L flush mounting plate |
| الكثافة الأساسية | Approximately 1200-2500 kg/m³ for polymer or glass reader face material |
| الموصلية الحرارية | 0.20-1.10 W/(m·K) for polymer or glass reader face |
| إنهاء السطح | Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs |
| نوع المشترك | Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication
Planning a Cleanroom Access Control System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
