Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Sistema de Control de Acceso a Sala Limpia
A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.
- Contactless Credential Reader
- Flush Cleanable Front
- Door Status Monitoring
- Interlock Integration
Introducción del producto
The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.
Características clave
A sealed flush reader face remains easy to wipe around the status window.
Door-position monitoring detects a door held open after authorized entry.
Controller inputs integrate request-to-exit, interlock and local alarm conditions.
Time-based permissions distinguish production, maintenance and visitor access.
Preocupaciones del producto del cliente
Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.
Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.
Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.
An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.
Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.
Aplicaciones típicas
Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors
Parámetros técnicos
Typical configurable construction ranges for a cleanroom access control system are listed below.
| Materiales Core | Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs |
|---|---|
| Panel de espesor | 2.0-4.0 mm cleanroom-facing reader plate thickness |
| Ancho efectivo | 80-220 mm reader and faceplate width |
| Longitud máxima | Up to 320 mm overall reader panel height |
| Acero frente a espesor | 1.5-3.0 mm SUS304/SUS316L flush mounting plate |
| Densidad Core | Approximately 1200-2500 kg/m³ for polymer or glass reader face material |
| Conductividad térmica | 0.20-1.10 W/(m·K) for polymer or glass reader face |
| Superficie acabada | Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs |
| Tipo conjunto | Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication
Planning a Cleanroom Access Control System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
