Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Cleanroom Access Control System
A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.
- Contactless Credential Reader
- Flush Cleanable Front
- Door Status Monitoring
- Interlock Integration
Produkteinführung
The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.
Key Features
A sealed flush reader face remains easy to wipe around the status window.
Door-position monitoring detects a door held open after authorized entry.
Controller inputs integrate request-to-exit, interlock and local alarm conditions.
Time-based permissions distinguish production, maintenance and visitor access.
Kunden Produktbedenken
Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.
Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.
Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.
An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.
Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.
Typische Anwendungen
Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors
Technische Parameter
Typical configurable construction ranges for a cleanroom access control system are listed below.
| Core Material | Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs |
|---|---|
| Panel Dicke | 2.0-4.0 mm cleanroom-facing reader plate thickness |
| Effektive Breite | 80-220 mm reader and faceplate width |
| Maximale Länge | Up to 320 mm overall reader panel height |
| Stahl facing Dicke | 1.5-3.0 mm SUS304/SUS316L flush mounting plate |
| Kerndichte | Approximately 1200-2500 kg/m³ for polymer or glass reader face material |
| Thermische Leitfähigkeit | 0.20-1.10 W/(m·K) for polymer or glass reader face |
| Oberfläche Finish | Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs |
| Gemeinsamer Typ | Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication
Planning a Cleanroom Access Control System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
