Cleanroom access control card reader on a flush stainless wall plate

クリーンルーム照明 · 電気機器

クリーンルームアクセス制御システム

A sealed credential reader and controller arrangement that manages authorized entry while monitoring cleanroom door and interlock states.

Contactless Credential Reader
Flush Cleanable Front
Door Status Monitoring
Interlock Integration

見積もりリクエスト製品案内

商品紹介

The access system combines a contactless card or mobile-credential reader at the cleanroom entrance with a protected controller, lock output, door contact and request-to-exit input. The reader mounts through a smooth stainless faceplate and uses colored LEDs and a sounder to communicate access state. Network management records events and coordinates permissions without exposing controller wiring in the clean zone.

主要な特徴

Contactless credentials reduce touch points at the doorway.

A sealed flush reader face remains easy to wipe around the status window.

Door-position monitoring detects a door held open after authorized entry.

Controller inputs integrate request-to-exit, interlock and local alarm conditions.

Time-based permissions distinguish production, maintenance and visitor access.

お客様の製品に関する懸念事項

Controlled access must protect the cleanroom boundary without slowing approved personnel or ignoring door and interlock conditions.

Mechanical keys cannot provide individual audit history.Electronic credentials record each accepted and rejected entry event.

Touch keypads add frequent-contact cleaning points.Contactless card or mobile reading completes normal entry without key presses.

An authorized door remains propped open after passage.The monitored door contact raises a held-open condition after the allowed time.

Access release conflicts with an active airlock interlock.The controller exchanges permissive and inhibit signals with the door logic.

典型的な用途

Cleanroom personnel entryGowning suite accessMaterial airlock authorizationRestricted laboratory doors

技術的なパラメータ

Typical configurable construction ranges for a cleanroom access control system are listed below.

コア材料	Sealed polymer or glass RFID reader in a stainless faceplate with remote controller, lock relay and monitored inputs
パネルの厚さ	2.0-4.0 mm cleanroom-facing reader plate thickness
有効幅	80-220 mm reader and faceplate width
最大長さ	Up to 320 mm overall reader panel height
鋼鉄の厚さを直面する	1.5-3.0 mm SUS304/SUS316L flush mounting plate
コア密度	Approximately 1200-2500 kg/m³ for polymer or glass reader face material
熱伝導率	0.20-1.10 W/(m·K) for polymer or glass reader face
表面仕上げ	Black or white sealed reader face within fine-brushed stainless, with green/red/amber status LEDs
ジョイントタイプ	Flush gasketed reader plate with concealed rear cable, remote controller and monitored door/lock terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Card, mobile or PIN credentialsSingle-door or multi-door controllerAnti-passback logicDoor-interlock communication

Planning a Cleanroom Access Control System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する