Complete chemical leak detector controller, probe and sensing cable in three-quarter view

Equipamentos de drenagem, higiene e segurança da sala limpa

Detector de vazamento químico

A point or cable-based detector that identifies liquid chemical leaks beneath process tools, tanks and distribution piping.

Point or Cable Sensing
Early Localized Leak Warning
Replaceable Sensor Elements
Remote Alarm Integration

Solicite um orçamento. Browse produtos

Introdução do produto

The chemical leak detector monitors a selected point probe or sensing cable for contact with compatible liquids. A controller evaluates the sensor, identifies alarm and fault conditions, and sends local and remote outputs to operators, exhaust systems or chemical shutdown controls. Probe chemistry and cable construction are selected for the expected acid, base, solvent or water-based liquid.

Características-chave

Distributed sensing cable covers long pipe and equipment perimeters.

Point probes target sumps, drip trays and low collection points.

Separate alarm and cable-fault supervision improve diagnostics.

Relay, analog or network outputs integrate with facility controls.

Preocupações do produto do cliente

A small hidden chemical release can travel beneath equipment before operators see it, causing corrosion and extended shutdown.

Visual inspections miss leaks under enclosed tools.Sensing cable or point probes continuously monitor concealed collection paths.

One sensing material is not compatible with every chemical.Sensor chemistry is selected for the actual liquid inventory.

A broken cable can appear identical to a dry condition.Continuity supervision reports open-circuit and controller faults separately.

Operators need to isolate the source quickly.Zoned controllers or distance-locating cable identify the affected section.

Aplicações típicas

Wet process toolsChemical distribution roomsLaboratory benchesTank and pump skids

Parâmetros técnicos

Typical controller construction is listed below; sensor material, cable length and zoning follow the chemical distribution layout.

Material principal	Powder-coated steel controller with chemical-compatible point probe or sensing cable
Painel de espessura	1.0-1.5 mm controller enclosure
Largura efetiva	150-350 mm controller width
Comprimento máximo	Up to 500 mm enclosure height
Aço enfrentando espessura	1.0-1.5 mm steel enclosure panels
Densidade Core	7850 kg/m³ for steel enclosure parts
Condutividade térmica	45-60 W/(m·K) for steel enclosure components
Superfície acabado	Smooth light-gray coating with high-visibility status indicators
Tipo conjunto	Gasketed controller with supervised plug terminals and detachable sensor connectors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Point probesSensing cableMulti-zone controllerRemote shutdown relays

Planning a Chemical Leak Detector specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe