İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Kimyasal Sızıntı Detektörü
A point or cable-based detector that identifies liquid chemical leaks beneath process tools, tanks and distribution piping.
- Point or Cable Sensing
- Early Localized Leak Warning
- Replaceable Sensor Elements
- Remote Alarm Integration
Ürün tanıtımı
The chemical leak detector monitors a selected point probe or sensing cable for contact with compatible liquids. A controller evaluates the sensor, identifies alarm and fault conditions, and sends local and remote outputs to operators, exhaust systems or chemical shutdown controls. Probe chemistry and cable construction are selected for the expected acid, base, solvent or water-based liquid.
Ana Özellikler
Point probes target sumps, drip trays and low collection points.
Separate alarm and cable-fault supervision improve diagnostics.
Relay, analog or network outputs integrate with facility controls.
Müşteri Ürün Sorunları
A small hidden chemical release can travel beneath equipment before operators see it, causing corrosion and extended shutdown.
Visual inspections miss leaks under enclosed tools.Sensing cable or point probes continuously monitor concealed collection paths.
One sensing material is not compatible with every chemical.Sensor chemistry is selected for the actual liquid inventory.
A broken cable can appear identical to a dry condition.Continuity supervision reports open-circuit and controller faults separately.
Operators need to isolate the source quickly.Zoned controllers or distance-locating cable identify the affected section.
Tipik uygulamalar
Wet process toolsChemical distribution roomsLaboratory benchesTank and pump skids
Teknik parametreler
Typical controller construction is listed below; sensor material, cable length and zoning follow the chemical distribution layout.
| Temel malzemeler | Powder-coated steel controller with chemical-compatible point probe or sensing cable |
|---|---|
| Panel kalınlığı | 1.0-1.5 mm controller enclosure |
| Effective Width (Etkili Genişlik) | 150-350 mm controller width |
| Maksimum uzunluk | Up to 500 mm enclosure height |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm steel enclosure panels |
| Core Density (Çekirdek Yoğunluğu) | 7850 kg/m³ for steel enclosure parts |
| Termal İletkenlik | 45-60 W/(m·K) for steel enclosure components |
| Yüzey bitirme | Smooth light-gray coating with high-visibility status indicators |
| Ortak tip | Gasketed controller with supervised plug terminals and detachable sensor connectors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Point probesSensing cableMulti-zone controllerRemote shutdown relays
Planning a Chemical Leak Detector specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
