Complete chemical leak detector controller, probe and sensing cable in three-quarter view

Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan

Detektor Kebocoran Kimia

A point or cable-based detector that identifies liquid chemical leaks beneath process tools, tanks and distribution piping.

Point or Cable Sensing
Early Localized Leak Warning
Replaceable Sensor Elements
Remote Alarm Integration

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The chemical leak detector monitors a selected point probe or sensing cable for contact with compatible liquids. A controller evaluates the sensor, identifies alarm and fault conditions, and sends local and remote outputs to operators, exhaust systems or chemical shutdown controls. Probe chemistry and cable construction are selected for the expected acid, base, solvent or water-based liquid.

Fitur utama:

Distributed sensing cable covers long pipe and equipment perimeters.

Point probes target sumps, drip trays and low collection points.

Separate alarm and cable-fault supervision improve diagnostics.

Relay, analog or network outputs integrate with facility controls.

Kekhawatiran produk pelanggan

A small hidden chemical release can travel beneath equipment before operators see it, causing corrosion and extended shutdown.

Visual inspections miss leaks under enclosed tools.Sensing cable or point probes continuously monitor concealed collection paths.

One sensing material is not compatible with every chemical.Sensor chemistry is selected for the actual liquid inventory.

A broken cable can appear identical to a dry condition.Continuity supervision reports open-circuit and controller faults separately.

Operators need to isolate the source quickly.Zoned controllers or distance-locating cable identify the affected section.

Aplikasi yang Tipis

Wet process toolsChemical distribution roomsLaboratory benchesTank and pump skids

Parameter teknis

Typical controller construction is listed below; sensor material, cable length and zoning follow the chemical distribution layout.

Bahan inti	Powder-coated steel controller with chemical-compatible point probe or sensing cable
Ketebalan Panel (Panel Thickness)	1.0-1.5 mm controller enclosure
Efektif lebar	150-350 mm controller width
Panjang maksimum	Up to 500 mm enclosure height
Baja menghadap ketebalan	1.0-1.5 mm steel enclosure panels
Kepadatan inti (core density)	7850 kg / m3 untuk bagian kandang baja
Konduktivitas Termal (Thermal Conductivity)	45 - 60 W / (m · K) untuk komponen kandang baja
Permukaan selesai	Smooth light-gray coating with high-visibility status indicators
Jenis Bersama	Gasketed controller with supervised plug terminals and detachable sensor connectors
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Point probesSensing cableMulti-zone controllerRemote shutdown relays

Planning a Chemical Leak Detector specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami