English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Химический детектор утечки
A point or cable-based detector that identifies liquid chemical leaks beneath process tools, tanks and distribution piping.
- Point or Cable Sensing
- Early Localized Leak Warning
- Replaceable Sensor Elements
- Remote Alarm Integration
Введение продукции
The chemical leak detector monitors a selected point probe or sensing cable for contact with compatible liquids. A controller evaluates the sensor, identifies alarm and fault conditions, and sends local and remote outputs to operators, exhaust systems or chemical shutdown controls. Probe chemistry and cable construction are selected for the expected acid, base, solvent or water-based liquid.
Основные характеристики
Point probes target sumps, drip trays and low collection points.
Separate alarm and cable-fault supervision improve diagnostics.
Relay, analog or network outputs integrate with facility controls.
Обеспокоенность клиентов продуктами
A small hidden chemical release can travel beneath equipment before operators see it, causing corrosion and extended shutdown.
Visual inspections miss leaks under enclosed tools.Sensing cable or point probes continuously monitor concealed collection paths.
One sensing material is not compatible with every chemical.Sensor chemistry is selected for the actual liquid inventory.
A broken cable can appear identical to a dry condition.Continuity supervision reports open-circuit and controller faults separately.
Operators need to isolate the source quickly.Zoned controllers or distance-locating cable identify the affected section.
Типичные приложения
Wet process toolsChemical distribution roomsLaboratory benchesTank and pump skids
Технические параметры
Typical controller construction is listed below; sensor material, cable length and zoning follow the chemical distribution layout.
| Основной материал | Powder-coated steel controller with chemical-compatible point probe or sensing cable |
|---|---|
| Толщина панели | 1.0-1.5 mm controller enclosure |
| эффективная ширина | 150-350 mm controller width |
| Максимальная длина | Up to 500 mm enclosure height |
| Толщина линий стали | 1.0-1.5 mm steel enclosure panels |
| Плотность ядра | 7850 kg/m³ for steel enclosure parts |
| Теплопроводимость | 45-60 W/(m·K) for steel enclosure components |
| Поверхностная отделка | Smooth light-gray coating with high-visibility status indicators |
| Объединенный тип | Gasketed controller with supervised plug terminals and detachable sensor connectors |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Point probesSensing cableMulti-zone controllerRemote shutdown relays
Planning a Chemical Leak Detector specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
