Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Z Bracket de suspensão do teto
A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.
- Rigid Angle Plate
- Threaded-Rod Aperture
- Twin Clevis Ears
- Galvanized Finish
Introdução do produto
The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.
Características-chave
A dedicated large aperture accommodates the specified threaded-rod fitting.
Twin clevis ears provide a balanced pinned connection.
Galvanized steel supports concealed interior corrosion protection.
Preocupações do produto do cliente
A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.
Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.
Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.
Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.
Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.
Aplicações típicas
Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing
Parâmetros técnicos
Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.
| Material principal | Welded galvanized carbon-steel angle plate with twin clevis ears |
|---|---|
| Painel de espessura | 40-150 mm compatible cleanroom ceiling-panel thickness |
| Largura efetiva | 40-160 mm mounting plate width |
| Comprimento máximo | Up to 300 mm overall bracket length |
| Aço enfrentando espessura | 3.00-8.00 mm bracket plate thickness |
| Densidade Core | Approximately 7850 kg/m³ for carbon steel |
| Condutividade térmica | 45 - 60 W / (m · K) para aço carbono |
| Superfície acabado | Silver zinc-plated or hot-dip galvanized steel |
| Tipo conjunto | Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip
Planning a Ceiling Suspension Bracket specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
