Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Accesorios de instalación de sala limpia
Bracket de suspensión de techo
A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.
- Rigid Angle Plate
- Threaded-Rod Aperture
- Twin Clevis Ears
- Galvanized Finish
Introducción del producto
The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.
Características clave
A dedicated large aperture accommodates the specified threaded-rod fitting.
Twin clevis ears provide a balanced pinned connection.
Galvanized steel supports concealed interior corrosion protection.
Preocupaciones del producto del cliente
A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.
Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.
Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.
Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.
Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.
Aplicaciones típicas
Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing
Parámetros técnicos
Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.
| Materiales Core | Welded galvanized carbon-steel angle plate with twin clevis ears |
|---|---|
| Panel de espesor | 40-150 mm compatible cleanroom ceiling-panel thickness |
| Ancho efectivo | 40-160 mm mounting plate width |
| Longitud máxima | Up to 300 mm overall bracket length |
| Acero frente a espesor | 3.00-8.00 mm bracket plate thickness |
| Densidad Core | Approximately 7850 kg/m³ for carbon steel |
| Conductividad térmica | Approximately 45-60 W/(m·K) for carbon steel |
| Superficie acabada | Silver zinc-plated or hot-dip galvanized steel |
| Tipo conjunto | Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip
Planning a Ceiling Suspension Bracket specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
