Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Aksesoris Instalasi Cleanroom
Suspension Bracket Ceiling Suspension Bracket
A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.
- Rigid Angle Plate
- Threaded-Rod Aperture
- Twin Clevis Ears
- Galvanized Finish
Perkenalan produk
The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.
Fitur utama:
A dedicated large aperture accommodates the specified threaded-rod fitting.
Twin clevis ears provide a balanced pinned connection.
Galvanized steel supports concealed interior corrosion protection.
Kekhawatiran produk pelanggan
A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.
Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.
Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.
Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.
Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.
Aplikasi yang Tipis
Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing
Parameter teknis
Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.
| Bahan inti | Welded galvanized carbon-steel angle plate with twin clevis ears |
|---|---|
| Ketebalan Panel (Panel Thickness) | 40-150 mm compatible cleanroom ceiling-panel thickness |
| Efektif lebar | 40-160 mm mounting plate width |
| Panjang maksimum | Up to 300 mm overall bracket length |
| Baja menghadap ketebalan | 3.00-8.00 mm bracket plate thickness |
| Kepadatan inti (core density) | Approximately 7850 kg/m³ for carbon steel |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 45-60 W/(m·K) for carbon steel |
| Permukaan selesai | Silver zinc-plated or hot-dip galvanized steel |
| Jenis Bersama | Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip
Planning a Ceiling Suspension Bracket specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
