Three-quarter view of a galvanized cleanroom ceiling suspension bracket

クリーンルームの設置付属品

Ceiling サスペンションブラケット

A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.

Rigid Angle Plate
Threaded-Rod Aperture
Twin Clevis Ears
Galvanized Finish

見積もりリクエスト製品案内

商品紹介

The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.

主要な特徴

Perpendicular plates resist rotation at the mounting interface.

A dedicated large aperture accommodates the specified threaded-rod fitting.

Twin clevis ears provide a balanced pinned connection.

Galvanized steel supports concealed interior corrosion protection.

お客様の製品に関する懸念事項

A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.

Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.

Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.

Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.

Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.

典型的な用途

Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing

技術的なパラメータ

Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.

コア材料	Welded galvanized carbon-steel angle plate with twin clevis ears
パネルの厚さ	40-150 mm compatible cleanroom ceiling-panel thickness
有効幅	40-160 mm mounting plate width
最大長さ	Up to 300 mm overall bracket length
鋼鉄の厚さを直面する	3.00-8.00 mm bracket plate thickness
コア密度	Approximately 7850 kg/m³ for carbon steel
熱伝導率	Approximately 45-60 W/(m·K) for carbon steel
表面仕上げ	Silver zinc-plated or hot-dip galvanized steel
ジョイントタイプ	Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip

Planning a Ceiling Suspension Bracket specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する