Three-quarter view of a galvanized cleanroom ceiling suspension bracket

클린룸 설치 액세서리

천장 서스펜션 브래킷

A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.

Rigid Angle Plate
Threaded-Rod Aperture
Twin Clevis Ears
Galvanized Finish

견적 요청 제품 찾아보기

상품 소개

The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.

주요 기능

Perpendicular plates resist rotation at the mounting interface.

A dedicated large aperture accommodates the specified threaded-rod fitting.

Twin clevis ears provide a balanced pinned connection.

Galvanized steel supports concealed interior corrosion protection.

고객 제품 관심사

A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.

Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.

Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.

Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.

Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.

일반적인 응용 프로그램

Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing

기술 매개변수

Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.

핵심 재료	Welded galvanized carbon-steel angle plate with twin clevis ears
패널 두께	40-150 mm compatible cleanroom ceiling-panel thickness
유효 폭	40-160 mm mounting plate width
최대 길이	Up to 300 mm overall bracket length
강철 면면 두께	3.00-8.00 mm bracket plate thickness
코어 밀도	Approximately 7850 kg/m³ for carbon steel
열전도도 (Thermal Conductivity)	Approximately 45-60 W/(m·K) for carbon steel
표면 마무리	Silver zinc-plated or hot-dip galvanized steel
접합 유형	Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip

Planning a Ceiling Suspension Bracket specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.