Three-quarter view of a galvanized cleanroom ceiling suspension bracket

Aksesori Pemasangan Bilik Bersih

Kurungan Suspensi Siling

A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.

Rigid Angle Plate
Threaded-Rod Aperture
Twin Clevis Ears
Galvanized Finish

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.

Ciri-ciri Utama

Perpendicular plates resist rotation at the mounting interface.

A dedicated large aperture accommodates the specified threaded-rod fitting.

Twin clevis ears provide a balanced pinned connection.

Galvanized steel supports concealed interior corrosion protection.

Kebimbangan Produk Pelanggan

A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.

Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.

Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.

Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.

Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.

Permohonan yang biasa

Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing

Parameter teknikal

Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.

Bahan Teras	Welded galvanized carbon-steel angle plate with twin clevis ears
Ketebalan Panel	40-150 mm compatible cleanroom ceiling-panel thickness
Lebar berkesan	40-160 mm mounting plate width
Panjang maksimum	Up to 300 mm overall bracket length
Keluli Menghadapi Ketebalan	3.00-8.00 mm bracket plate thickness
Ketumpatan teras	Approximately 7850 kg/m³ for carbon steel
Kekonduksian Terma	Approximately 45-60 W/(m·K) for carbon steel
Kemasan permukaan	Silver zinc-plated or hot-dip galvanized steel
Jenis Bersatu	Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip

Planning a Ceiling Suspension Bracket specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami