English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
اكسسوارات تركيب الغرف النظيفة
قوس تعليق السقف
A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.
- Rigid Angle Plate
- Threaded-Rod Aperture
- Twin Clevis Ears
- Galvanized Finish
مقدمة المنتج
The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.
الخصائص الرئيسية
A dedicated large aperture accommodates the specified threaded-rod fitting.
Twin clevis ears provide a balanced pinned connection.
Galvanized steel supports concealed interior corrosion protection.
مخاوف المنتج للعملاء
A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.
Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.
Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.
Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.
Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.
تطبيقات نموذجية
Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing
المعلمات الفنية
Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.
| المواد الأساسية | Welded galvanized carbon-steel angle plate with twin clevis ears |
|---|---|
| سمك اللوحة | 40-150 mm compatible cleanroom ceiling-panel thickness |
| العرض الفعال | 40-160 mm mounting plate width |
| الحد الأقصى الطول | Up to 300 mm overall bracket length |
| الصلب يواجه سمك | 3.00-8.00 mm bracket plate thickness |
| الكثافة الأساسية | Approximately 7850 kg/m³ for carbon steel |
| الموصلية الحرارية | Approximately 45-60 W/(m·K) for carbon steel |
| إنهاء السطح | Silver zinc-plated or hot-dip galvanized steel |
| نوع المشترك | Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip
Planning a Ceiling Suspension Bracket specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
