EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Wall Mop
Low-profile cleanroom wall mop with a pivoting stainless frame and sealed microfiber foam pad for controlled disinfectant application on vertical surfaces.
- Slim profile reaches behind fixed equipment
- Pivoting frame maintains surface contact
- Low-lint sealed microfiber pad
Product Introduction
The Cleanroom Wall Mop combines a lightweight electropolished stainless-steel frame with a hydrophilic polyurethane foam pad faced in knitted polyester microfiber. A universal pivot lets the rectangular head follow vertical panels, corners and areas around doors or glazing without repeated hand contact. Thermally sealed pad edges and a smooth telescopic handle support low-lint cleaning and straightforward sanitation between uses.
Key Features
Sealed pad edges limit exposed fibers at the perimeter.
Hydrophilic foam meters disinfectant across broad surfaces.
Slim head accesses spaces behind process equipment.
Electropolished stainless frame tolerates repeated cleaning.
Replaceable pads support task-specific contamination control.
Customer Product Concerns
The system addresses uneven wetting, inaccessible wall sections, particle release and fatigue during overhead or vertical cleaning.
Streaked disinfectant coverageThe absorbent foam backing releases liquid progressively across the wall.
Restricted accessA thin pivoting head reaches narrow gaps and changes angle around fixtures.
Fiber contaminationKnitted polyester and sealed edges reduce loose perimeter fibers.
Operator strainA lightweight telescopic assembly expands reach without a ladder for routine areas.
Typical Applications
Cleanroom wall and partition disinfectionDoor, window and viewing-panel surroundsPharmaceutical production suitesSemiconductor controlled areasHigh-level vertical surfaces behind equipment
Technical Parameters
The dimensions below describe common reusable wall-mop frames and replaceable foam-backed polyester pads for controlled environments.
| Core Material | Hydrophilic polyurethane foam with knitted polyester microfiber face |
|---|---|
| Panel Thickness | 8-15 mm pad thickness |
| Effective Width | 240-460 mm cleaning width |
| Maximum Length | 2500 mm with telescopic handle extended |
| Steel Facing Thickness | 1.2 mm nominal stainless frame plate thickness |
| Core Density | 30-45 kg/m³ polyurethane foam density |
| Thermal Conductivity | 0.033-0.040 W/(m·K) nominal polyurethane foam range |
| Surface Finish | Ribbed polyester microfiber face and electropolished frame |
| Joint Type | Universal pivot head with snap-fit or keeper-secured pad |
| Customization | Available based on the intended application and operating environment. |
Available Options
240, 330, 380 or 460 mm head widthFixed or telescopic stainless handleRibbed microfiber or sealed smooth padSterile single-use replacement padsKeeper frame for dry or presaturated wipe covers
Planning a Cleanroom Wall Mop specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
