Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Limpeza, desinfecção e esterilização da sala limpa
Z Cleanroom Mop de parede
Low-profile cleanroom wall mop with a pivoting stainless frame and sealed microfiber foam pad for controlled disinfectant application on vertical surfaces.
- Slim profile reaches behind fixed equipment
- Pivoting frame maintains surface contact
- Low-lint sealed microfiber pad
Introdução do produto
The Cleanroom Wall Mop combines a lightweight electropolished stainless-steel frame with a hydrophilic polyurethane foam pad faced in knitted polyester microfiber. A universal pivot lets the rectangular head follow vertical panels, corners and areas around doors or glazing without repeated hand contact. Thermally sealed pad edges and a smooth telescopic handle support low-lint cleaning and straightforward sanitation between uses.
Características-chave
Sealed pad edges limit exposed fibers at the perimeter.
Hydrophilic foam meters disinfectant across broad surfaces.
Slim head accesses spaces behind process equipment.
Electropolished stainless frame tolerates repeated cleaning.
Replaceable pads support task-specific contamination control.
Preocupações do produto do cliente
The system addresses uneven wetting, inaccessible wall sections, particle release and fatigue during overhead or vertical cleaning.
Streaked disinfectant coverageThe absorbent foam backing releases liquid progressively across the wall.
Restricted accessA thin pivoting head reaches narrow gaps and changes angle around fixtures.
Fiber contaminationKnitted polyester and sealed edges reduce loose perimeter fibers.
Operator strainA lightweight telescopic assembly expands reach without a ladder for routine areas.
Aplicações típicas
Cleanroom wall and partition disinfectionDoor, window and viewing-panel surroundsPharmaceutical production suitesSemiconductor controlled areasHigh-level vertical surfaces behind equipment
Parâmetros técnicos
The dimensions below describe common reusable wall-mop frames and replaceable foam-backed polyester pads for controlled environments.
| Material principal | Hydrophilic polyurethane foam with knitted polyester microfiber face |
|---|---|
| Painel de espessura | 8-15 mm pad thickness |
| Largura efetiva | 240-460 mm cleaning width |
| Comprimento máximo | 2500 mm with telescopic handle extended |
| Aço enfrentando espessura | 1.2 mm nominal stainless frame plate thickness |
| Densidade Core | 30-45 kg/m³ polyurethane foam density |
| Condutividade térmica | 0.033-0.040 W/(m·K) nominal polyurethane foam range |
| Superfície acabado | Ribbed polyester microfiber face and electropolished frame |
| Tipo conjunto | Universal pivot head with snap-fit or keeper-secured pad |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
240, 330, 380 or 460 mm head widthFixed or telescopic stainless handleRibbed microfiber or sealed smooth padSterile single-use replacement padsKeeper frame for dry or presaturated wipe covers
Planning a Cleanroom Wall Mop specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
