English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
تنظيف الغرف النظيفة والتطهير والتعقيم
ممسحة الحائطغرفة النظيفة
Low-profile cleanroom wall mop with a pivoting stainless frame and sealed microfiber foam pad for controlled disinfectant application on vertical surfaces.
- Slim profile reaches behind fixed equipment
- Pivoting frame maintains surface contact
- Low-lint sealed microfiber pad
مقدمة المنتج
The Cleanroom Wall Mop combines a lightweight electropolished stainless-steel frame with a hydrophilic polyurethane foam pad faced in knitted polyester microfiber. A universal pivot lets the rectangular head follow vertical panels, corners and areas around doors or glazing without repeated hand contact. Thermally sealed pad edges and a smooth telescopic handle support low-lint cleaning and straightforward sanitation between uses.
الخصائص الرئيسية
Sealed pad edges limit exposed fibers at the perimeter.
Hydrophilic foam meters disinfectant across broad surfaces.
Slim head accesses spaces behind process equipment.
Electropolished stainless frame tolerates repeated cleaning.
Replaceable pads support task-specific contamination control.
مخاوف المنتج للعملاء
The system addresses uneven wetting, inaccessible wall sections, particle release and fatigue during overhead or vertical cleaning.
Streaked disinfectant coverageThe absorbent foam backing releases liquid progressively across the wall.
Restricted accessA thin pivoting head reaches narrow gaps and changes angle around fixtures.
Fiber contaminationKnitted polyester and sealed edges reduce loose perimeter fibers.
Operator strainA lightweight telescopic assembly expands reach without a ladder for routine areas.
تطبيقات نموذجية
Cleanroom wall and partition disinfectionDoor, window and viewing-panel surroundsPharmaceutical production suitesSemiconductor controlled areasHigh-level vertical surfaces behind equipment
المعلمات الفنية
The dimensions below describe common reusable wall-mop frames and replaceable foam-backed polyester pads for controlled environments.
| المواد الأساسية | Hydrophilic polyurethane foam with knitted polyester microfiber face |
|---|---|
| سمك اللوحة | 8-15 mm pad thickness |
| العرض الفعال | 240-460 mm cleaning width |
| الحد الأقصى الطول | 2500 mm with telescopic handle extended |
| الصلب يواجه سمك | 1.2 mm nominal stainless frame plate thickness |
| الكثافة الأساسية | 30-45 kg/m³ polyurethane foam density |
| الموصلية الحرارية | 0.033-0.040 W/(m·K) nominal polyurethane foam range |
| إنهاء السطح | Ribbed polyester microfiber face and electropolished frame |
| نوع المشترك | Universal pivot head with snap-fit or keeper-secured pad |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
240, 330, 380 or 460 mm head widthFixed or telescopic stainless handleRibbed microfiber or sealed smooth padSterile single-use replacement padsKeeper frame for dry or presaturated wipe covers
Planning a Cleanroom Wall Mop specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
