クリーンルーム機器と無菌施設の必需品のワンストップサプライヤー国際プロジェクト支援
Open mobile navigationClose mobile navigation
クリーンルームの清掃 · 消毒 · 滅菌

クリーンルームウォールモップ

Low-profile cleanroom wall mop with a pivoting stainless frame and sealed microfiber foam pad for controlled disinfectant application on vertical surfaces.
  • Slim profile reaches behind fixed equipment
  • Pivoting frame maintains surface contact
  • Low-lint sealed microfiber pad
見積もりリクエスト 製品案内

商品紹介

The Cleanroom Wall Mop combines a lightweight electropolished stainless-steel frame with a hydrophilic polyurethane foam pad faced in knitted polyester microfiber. A universal pivot lets the rectangular head follow vertical panels, corners and areas around doors or glazing without repeated hand contact. Thermally sealed pad edges and a smooth telescopic handle support low-lint cleaning and straightforward sanitation between uses.

主要な特徴

Articulating head stays flat against walls and partitions.

Sealed pad edges limit exposed fibers at the perimeter.

Hydrophilic foam meters disinfectant across broad surfaces.

Slim head accesses spaces behind process equipment.

Electropolished stainless frame tolerates repeated cleaning.

Replaceable pads support task-specific contamination control.

お客様の製品に関する懸念事項

The system addresses uneven wetting, inaccessible wall sections, particle release and fatigue during overhead or vertical cleaning.

Streaked disinfectant coverageThe absorbent foam backing releases liquid progressively across the wall.
Restricted accessA thin pivoting head reaches narrow gaps and changes angle around fixtures.
Fiber contaminationKnitted polyester and sealed edges reduce loose perimeter fibers.
オペレータ歪A lightweight telescopic assembly expands reach without a ladder for routine areas.

典型的な用途

Cleanroom wall and partition disinfectionDoor, window and viewing-panel surrounds製薬生産スイートSemiconductor controlled areasHigh-level vertical surfaces behind equipment

技術的なパラメータ

The dimensions below describe common reusable wall-mop frames and replaceable foam-backed polyester pads for controlled environments.

コア材料Hydrophilic polyurethane foam with knitted polyester microfiber face
パネルの厚さ8-15 mm pad thickness
有効幅240-460 mm cleaning width
最大長さ2500 mm with telescopic handle extended
鋼鉄の厚さを直面する1.2 mm nominal stainless frame plate thickness
コア密度30-45 kg/m³ polyurethane foam density
熱伝導率0.033-0.040 W/(m·K) nominal polyurethane foam range
表面仕上げRibbed polyester microfiber face and electropolished frame
ジョイントタイプUniversal pivot head with snap-fit or keeper-secured pad
カスタマイズ意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

240, 330, 380 or 460 mm head widthFixed or telescopic stainless handleRibbed microfiber or sealed smooth padSterile single-use replacement padsKeeper frame for dry or presaturated wipe covers

Planning a Cleanroom Wall Mop specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する
メール送信 WhatsApp WeChat

ホーム

製品

ニュース

会社概要

お問い合わせ