Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Nettoyage, désinfection et stérilisation de la salle blanche
Cleanroom Wall Mop par
Low-profile cleanroom wall mop with a pivoting stainless frame and sealed microfiber foam pad for controlled disinfectant application on vertical surfaces.
- Slim profile reaches behind fixed equipment
- Pivoting frame maintains surface contact
- Low-lint sealed microfiber pad
Introduction de produit
The Cleanroom Wall Mop combines a lightweight electropolished stainless-steel frame with a hydrophilic polyurethane foam pad faced in knitted polyester microfiber. A universal pivot lets the rectangular head follow vertical panels, corners and areas around doors or glazing without repeated hand contact. Thermally sealed pad edges and a smooth telescopic handle support low-lint cleaning and straightforward sanitation between uses.
Key Features
Sealed pad edges limit exposed fibers at the perimeter.
Hydrophilic foam meters disinfectant across broad surfaces.
Slim head accesses spaces behind process equipment.
Electropolished stainless frame tolerates repeated cleaning.
Replaceable pads support task-specific contamination control.
Préoccupations du client produit
The system addresses uneven wetting, inaccessible wall sections, particle release and fatigue during overhead or vertical cleaning.
Streaked disinfectant coverageThe absorbent foam backing releases liquid progressively across the wall.
Restricted accessA thin pivoting head reaches narrow gaps and changes angle around fixtures.
Fiber contaminationKnitted polyester and sealed edges reduce loose perimeter fibers.
Opérateur StrainA lightweight telescopic assembly expands reach without a ladder for routine areas.
Les applications typiques
Cleanroom wall and partition disinfectionDoor, window and viewing-panel surroundsPharmaceutical production suitesSemiconductor controlled areasHigh-level vertical surfaces behind equipment
Paramètres techniques
The dimensions below describe common reusable wall-mop frames and replaceable foam-backed polyester pads for controlled environments.
| Matériaux de base | Hydrophilic polyurethane foam with knitted polyester microfiber face |
|---|---|
| Panneau épaisseur | 8-15 mm pad thickness |
| Largeur effective | 240-460 mm cleaning width |
| Longueur maximale | 2500 mm with telescopic handle extended |
| Acier face épaisseur | 1.2 mm nominal stainless frame plate thickness |
| Densité Core | 30-45 kg/m³ polyurethane foam density |
| Conductivité thermique | 0.033-0.040 W/(m·K) nominal polyurethane foam range |
| surface finie | Ribbed polyester microfiber face and electropolished frame |
| Type joint | Universal pivot head with snap-fit or keeper-secured pad |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
240, 330, 380 or 460 mm head widthFixed or telescopic stainless handleRibbed microfiber or sealed smooth padSterile single-use replacement padsKeeper frame for dry or presaturated wipe covers
Planning a Cleanroom Wall Mop specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
