EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Cleanroom Detergent
A neutral, low-foaming aqueous detergent for removing handling soils, light oils, particles, and process residues from hard cleanroom surfaces.
- Neutral surfactant chemistry supports routine surface compatibility
- Low-foam action suits controlled wiping and mopping techniques
- Free-rinsing formulation helps limit visible detergent deposits
Product Introduction
Cleanroom detergent is a low-surfactant aqueous cleaner intended for floors, walls, ceilings, benches, doors, and compatible equipment exteriors in controlled environments. The near-neutral formulation provides general soil removal without the aggressive alkalinity of heavy-duty process cleaners. Ready-to-use liquid reduces dilution handling for local wiping, while capped bulk and measured concentrate formats can support larger-area mopping. The cleaning concentration, contact time, mechanical action, rinse step, and material compatibility should be defined by the facility's approved cleaning method.
Key Features
Low-foaming action for wipes, flat mops, and bucket systems
Low surfactant loading to simplify residue removal
Effective wetting of smooth nonporous cleanroom surfaces
Clear, colorless formulation without unnecessary dye or perfume
Ready-to-use and concentrated packaging configurations
Compatible with purified-water rinsing where required
Smooth HDPE containers suitable for controlled material transfer
Customer Product Concerns
Disinfection alone may not remove dust-binding films, oils, adhesive traces, or accumulated chemistry. Excess foam obscures surface coverage and slows rinsing, while overdosing a detergent can leave streaks or tacky deposits that attract new particles.
Will the detergent leave a film after repeated cleaning?Low surfactant loading, accurate dosing, thorough soil pickup, and a defined purified-water rinse help control streaking and cumulative deposits.
Is the formula suitable for sensitive cleanroom surfaces?Near-neutral chemistry is generally appropriate for common sealed nonporous materials, while site-specific compatibility testing confirms use on coatings, plastics, stainless steel, and glazing.
Can the product replace a disinfectant?The detergent is intended to detach and remove soil. It supports a clean surface for the separately selected disinfectant rather than replacing the disinfection stage.
How are dilution errors reduced in large-area cleaning?Ready-to-use liquid, measured unit-dose concentrate, and written bucket-volume instructions allow the same working strength to be prepared consistently.
Typical Applications
Pharmaceutical cleanroom floors, walls, and ceilingsBiotechnology processing support areasMedical-device controlled manufacturing roomsCleanroom benches and equipment exteriorsElectronics and semiconductor support spacesRemoval of routine soil before a separate disinfection step
Technical Parameters
Surface-active ingredients lower the wetting tension of the cleaning solution and loosen the bond between soil and a nonporous surface. A cleanroom wipe or mop then provides the mechanical action needed to capture and remove the released contamination. Where the site's residue limit requires it, a purified-water rinse completes the process.
| Core Material | Low-concentration surface-active detergent blended with purified or deionized water |
|---|---|
| Panel Thickness | 1.2–2.0 mm nominal HDPE container wall thickness |
| Effective Width | 170–220 mm typical width for a 5 L capped container |
| Maximum Length | 300–380 mm overall container height |
| Steel Facing Thickness | 0 mm; supplied in polymer packaging without steel facing |
| Core Density | 995–1020 kg/m³ typical density for the aqueous solution |
| Thermal Conductivity | Approximately 0.55–0.65 W/(m·K) at 20 °C for the water-based formulation |
| Surface Finish | Clear, colorless low-foaming liquid in a smooth wipeable HDPE container |
| Joint Type | Tamper-evident threaded screw-cap closure with an integral molded carrying handle |
| Customization | Available based on the intended application and operating environment. |
Available Options
1 L ready-to-use trigger bottle1 L capped bottle5 L capped HDPE containerSoluble or measured unit-dose concentratePurified-water or deionized-water blendFiltered configuration for controlled-area useDouble-bagged transfer packagingIrradiated configuration where specifically required
Planning a Cleanroom Detergent specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
