Temiz Oda Deterjanı
- Neutral surfactant chemistry supports routine surface compatibility
- Low-foam action suits controlled wiping and mopping techniques
- Free-rinsing formulation helps limit visible detergent deposits
Ürün tanıtımı
Cleanroom detergent is a low-surfactant aqueous cleaner intended for floors, walls, ceilings, benches, doors, and compatible equipment exteriors in controlled environments. The near-neutral formulation provides general soil removal without the aggressive alkalinity of heavy-duty process cleaners. Ready-to-use liquid reduces dilution handling for local wiping, while capped bulk and measured concentrate formats can support larger-area mopping. The cleaning concentration, contact time, mechanical action, rinse step, and material compatibility should be defined by the facility's approved cleaning method.
Ana Özellikler
Low-foaming action for wipes, flat mops, and bucket systems
Low surfactant loading to simplify residue removal
Effective wetting of smooth nonporous cleanroom surfaces
Clear, colorless formulation without unnecessary dye or perfume
Ready-to-use and concentrated packaging configurations
Compatible with purified-water rinsing where required
Smooth HDPE containers suitable for controlled material transfer
Müşteri Ürün Sorunları
Disinfection alone may not remove dust-binding films, oils, adhesive traces, or accumulated chemistry. Excess foam obscures surface coverage and slows rinsing, while overdosing a detergent can leave streaks or tacky deposits that attract new particles.
Tipik uygulamalar
Teknik parametreler
Surface-active ingredients lower the wetting tension of the cleaning solution and loosen the bond between soil and a nonporous surface. A cleanroom wipe or mop then provides the mechanical action needed to capture and remove the released contamination. Where the site's residue limit requires it, a purified-water rinse completes the process.
| Temel malzemeler | Low-concentration surface-active detergent blended with purified or deionized water |
|---|---|
| Panel kalınlığı | 1.2–2.0 mm nominal HDPE container wall thickness |
| Effective Width (Etkili Genişlik) | 170–220 mm typical width for a 5 L capped container |
| Maksimum uzunluk | 300–380 mm overall container height |
| Çelik yüz yüze kalınlığı | 0 mm; supplied in polymer packaging without steel facing |
| Core Density (Çekirdek Yoğunluğu) | 995–1020 kg/m³ typical density for the aqueous solution |
| Termal İletkenlik | Approximately 0.55–0.65 W/(m·K) at 20 °C for the water-based formulation |
| Yüzey bitirme | Clear, colorless low-foaming liquid in a smooth wipeable HDPE container |
| Ortak tip | Tamper-evident threaded screw-cap closure with an integral molded carrying handle |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Planning a Cleanroom Detergent specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca