ผงซักฟอกห้องสะอาด
- Neutral surfactant chemistry supports routine surface compatibility
- Low-foam action suits controlled wiping and mopping techniques
- Free-rinsing formulation helps limit visible detergent deposits
การแนะนําสินค้า
Cleanroom detergent is a low-surfactant aqueous cleaner intended for floors, walls, ceilings, benches, doors, and compatible equipment exteriors in controlled environments. The near-neutral formulation provides general soil removal without the aggressive alkalinity of heavy-duty process cleaners. Ready-to-use liquid reduces dilution handling for local wiping, while capped bulk and measured concentrate formats can support larger-area mopping. The cleaning concentration, contact time, mechanical action, rinse step, and material compatibility should be defined by the facility's approved cleaning method.
คุณสมบัติที่สําคัญ
Low-foaming action for wipes, flat mops, and bucket systems
Low surfactant loading to simplify residue removal
Effective wetting of smooth nonporous cleanroom surfaces
Clear, colorless formulation without unnecessary dye or perfume
Ready-to-use and concentrated packaging configurations
Compatible with purified-water rinsing where required
Smooth HDPE containers suitable for controlled material transfer
ความกังวลของลูกค้าเกี่ยวกับผลิตภัณฑ์
Disinfection alone may not remove dust-binding films, oils, adhesive traces, or accumulated chemistry. Excess foam obscures surface coverage and slows rinsing, while overdosing a detergent can leave streaks or tacky deposits that attract new particles.
การใช้งานทั่วไป
พารามิเตอร์ทางเทคนิค
Surface-active ingredients lower the wetting tension of the cleaning solution and loosen the bond between soil and a nonporous surface. A cleanroom wipe or mop then provides the mechanical action needed to capture and remove the released contamination. Where the site's residue limit requires it, a purified-water rinse completes the process.
| วัสดุหลัก | Low-concentration surface-active detergent blended with purified or deionized water |
|---|---|
| ความหนาของแผง | 1.2–2.0 mm nominal HDPE container wall thickness |
| ความกว้างที่มีประสิทธิภาพ | 170–220 mm typical width for a 5 L capped container |
| ความยาวสูงสุด | 300–380 mm overall container height |
| ความหนาของเหล็กหันหน้า | 0 mm; supplied in polymer packaging without steel facing |
| ความหนาแน่นหลัก | 995–1020 kg/m³ typical density for the aqueous solution |
| การนําความร้อน | Approximately 0.55–0.65 W/(m·K) at 20 °C for the water-based formulation |
| เสร็จสิ้นพื้นผิว | Clear, colorless low-foaming liquid in a smooth wipeable HDPE container |
| ประเภทร่วม | Tamper-evident threaded screw-cap closure with an integral molded carrying handle |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Planning a Cleanroom Detergent specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาเยอรมัน
ภาษาอาหรับ
ฝรั่งเศส
ภาษาอินโดนีเซีย
ภาษาญี่ปุ่น
ภาษาเกาหลี
ภาษามาเลย์
ภาษาโปรตุเกส
ภาษารัสเซีย
ภาษาสเปน
ภาษาไทยปัจจุบัน
ภาษาตุรกี
ภาษาเวียดนาม